Seereba Engineers

Prominent & Leading Distributor / Channel Partner from Noida, we offer Control Valve, Butterfly Valve, Diaphragm Dispense Valve, Crane Limit Switch and Diapharagm Valve.

Dual Plate Check Valves are a type of check valve designed to prevent backflow in pipelines, ensuring that the flow of fluid or gas moves in only one direction. They are widely used in various industries, including water treatment, oil and gas, power generation, and chemical processing.

SIZE RANGE

• DN 40 up to DN 1400, 1 1/2” up to 56”

PRESSURE RATINGS

• PN10, PN16, ASME class 150

TEMPERATURE RANGE

• -30°C (-22°F) up to 200°C (392°F) depending on material selection

BODY CONFIGURATION

• Lug type
• Wafer type
• Wafer type with centering lugs
• Double flanged

SPECIAL OPTIONS

• Additional trunion bearing for high cycling applications
• Shaft extensions

BUTTERFLY VALVE CRANE WAFER AND LUG

Areas of application:CENTERLINE Butterfly Valves Series RS are reliable, maintenance-free shutoff andcontrol valves with permanently gas-tight seal. This valve has proved itself as a leakage-freeand corrosion-resistant valve in various applications under most difficult operating conditions.The safety and reliability of a valve is especially important when used for aggressive media –all components within the CENTERLINE Butterfly Valves Series RS have been designedaccordingly.Product features:
Concentric design
Soft seat design
No pins needed to attach the disc to the shaft, only 2 partsin contact with the medium
Replaceable body lining with firm back-up ring
Permanently tight closure
Optimum operation under vacuum conditions
Standardized head flange for actuator adaption
Materials for almost all media
Short face-to-face dimension
Maintenance-free version
Blow-out proof shaft
Direct mounting of actuators without any additional bracketsOver 70,000 Butterfly Valves Series RS are installed in60 power generation sites and many sugar refineriesworldwide. Used on the most arduous conditions, this is proofof the Series RS durability and reliability when in operation.


Technical data:
DN 40-1200, NPS 36", 42", 48", 54"
PN 6, 10, 16, ANSI 150
Temperature range from -34°C (-29°F) to +150°C (+302°F)
Tightness in accordance with DIN 3230-T3, leakage rate 1
Face-to-face dimension in accordance with EN 558-1,series 20
Mounting flange in accordance with ISO 5211
Shaft end DN 50 – 300 with square in accordancewith DIN 3337
Insulation in accordance with heating system regulationpossible
DVGW – gas approval
Quality assurance in accordance with ISO 9001

REVO Quarter Turn Actuators - CRANE 

Crane Revo Make Pneumatic Type Rack & Pinion actuator single acting and double acting type. Used in Sugar, Automobile, Edible Oil & Steel Applications. Used in industrial washing machine such as Durr Washing Machine used in Automobile and Automobile component manufacturing sector

The Revo brand is the standard for excellence andperformance in actuator technology and is widelyrecognised in the process industries as a leader in qualityand innovation. That innovation is partnered with amanufacturing excellence to drive advances in producttechnology. With our combined knowledge and experiencewe can offer the optimum actuator for any application.

Revo actuators are primarily used forthe operation of valves with 90° travel,such as ball valves, plug valves andbutterfly valves, but also find applicationswhere rotary movements of 180°, Multipositionor others are needed. Revoquarter-turn actuators can be used foropen/close applications or for controlservice.The range comprises standardmodels to suit a wide range of torqueratings and flange connections.A comprehensive line-up of specificoptions further extends the applicationcapability to provide a configuration tosuit almost every purpose.On double-acting versions thevalve is opened and closed by thesupply of compressed air to theactuator. On single-acting actuatorscompressed air is applied only in onedirection, movement in the oppositedirection is accomplished by springforce. This offers a fail-safe function incase of a failure in the air supply.Revo quarter-turn actuators alreadycomply with the EN-standards, whichwill supersede a large proportion of theDIN-standards, as well as a variety ofISO-standard drafts and various factorystandards used in large scale industry.


AutomationIntelligent automation is crucial to the efficiencyand profitability of today’s processing plants.Whether you’re operating basic valve andactuator packages to facilitate simple“open/close” manoeuvres or runningcomplex bus-interfaced systems as partof wider plant control, there’s a Revoactuation package to suit the application

Customisation is the KeyNearly every application requires a diffrentsolution. Crane can offer the rightactuation and control package for yourspecific demand. That’s why at Revo, weoffer a full customisation service. We cansupply a single, basic actuator or acomplete module consisting of actuationand accessories such as solenoids, limitswitches, position and bus-systemcontrols.Designed

CRANE REVO rack and pinion actuators are well suited for any ball or butterfly valve, and are available in spring return or double acting quarter turn design for " to 48" valves.FEATURE:- Rack and Pinion Size Range: " - 48" Torque: 30 in-lb to 107,531 in-lb Spring Return (CW, CCW) Double Acting Direct Mount to RS Valve Bracket Mount Special Configurations

Product Description

Stainless Steel needle valve allows the user to precisely control flow by screwing the needle down onto a seat. Rated to 408 BAR (6000 psi) with T bar handle. Great for use on compatible fluids and gases.

Ball Valves CRANE

The Crane Fluid Systems ball valve series offers compact, lightweight units, which are easy to install and operate. Their ability to withstand robust construction ensures a long, straightforward service life. They offer full flow with minimum turbulence in the open position and bubble tight closure in the closed position. Only a quarter-turn is required to fully open or close the valve.

CRANE® cast steel gate, globe & check valves are solid, proven & reliable on-off valves for steam, water, air, gas, oil & other industrial applications.



We are engaged in offering a comprehensive range of Cast Steel Valves Check valves are mechanical devices, that generally allows a fluid to flow through it only in one direction. Important concept related with check valves is its cracking pressure, which is minimal during upstream pressure at which the valve operates. These are known for their optimum usage and superior performance.

Barksdale's Microtorque® valve provides superior directional control for fluid power applications up to 6,000 psi where compact design and virtually zero leakage* are a must. Utilizing Barksdale's Shear-Seal® technology, the Microtorque® valve offers reliable performance and lapped metal-to-metal sealing surfaces that will easily tolerate contaminated fluids. This valve offers many options that make it extremely versatile including panel mounting, spring return, 2 or 3 position detents, DO3 manifold mounting, and non-interflow. Leveraging the flexibility and unique features of the Microtorque® valve, along with its superior performance, can result in bottom line savings and operational benefits for your customers.

Heavy Duty ValvesSeries 140, 200, 920, 5620Shear-Seal® Manual Control Valve, Heavy Duty Line- Directional control for fluids and gasses up to 6,000 psiBarksdale's Heavy Duty Valve provides superior directional control for fluids and gasses up to 6,000 psi in the toughest industrial applications. Using Barksdale's Shear-Seal® technology, the Heavy Duty Valve


0801U929

51541M6HC3 VALVE-MICROTORQUE

Quantity Unit:PiecesWeight:0.23 kgCommodity Code:84818071Country of Origin:United States (US)